jetway 875pmaxr2a 사용자 설명서
12
Follow these steps to install the CPU heatsink and fan.
1. Place the heatsink on top of the installed CPU, making sure that the heatsink
1. Place the heatsink on top of the installed CPU, making sure that the heatsink
fits properly on the retention module base.
CPU Heatsink
Retention Module Base
Note!
1). The retention module base is already installed on the motherboard upon
purchase. You do not have to remove the retention module base when
installing the CPU or installing other motherboard components.
installing the CPU or installing other motherboard components.
2). Your boxed Intel Pentium 4 Processor package should come with
installation instructions for the CPU, heatsink, and the retention
mechanism. If the instructions in this section do not match the CPU,
please refer to the installation instructions inside the boxed Intel
Pentium 4 Processor package.
mechanism. If the instructions in this section do not match the CPU,
please refer to the installation instructions inside the boxed Intel
Pentium 4 Processor package.
2. Position the
fan
with the retention mechanism on top of the heatsink. Align
and snap the four hooks of the retention mechanism to the holes on each
corner of the module base.
corner of the module base.