jetway 875pmaxr2a 사용자 설명서

 
 
                                                                                                                                                                                                                                                                                                                                               

 

 

The items in Standard CMOS Setup Menu are divided into categories. There might be no, 
one, or more than one setup items in the category.    Use the arrow keys to highlight the item 
and then use the <PgUp> or <PgDn> keys to select the value you want in each item. 

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 

Standard CMOS Features 

 

Item Help 

 

    Date (mm:dd:yy)             Wed, May, 14 2003 

    Time (hh:mm:ss)             11 : 02 : 35 

  > IDE Primary Master          Press Enter None  
  > IDE Primary Slave           Press Enter None 
  > IDE Secondary Master        Press Enter None 
  > IDE Secondary Slave         Press Enter None 
    Drive A                     1.44M, 3.5 in.  
    Drive B                     None             
    Video                       EGA/VGA 
    Halt On                     All,But Keyboard 
    Base Memory                     640K 
    Extended Memory               56320K 
    Total Memory                  57344K 
 

 
  Menu Level > 
 
  Change the day, month, 
  year and century 
 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values   F6:Optimized Defaults    F7:Standard Defaults 

Date 
The date format is <day><month><date><year>.  

Day      Day of the week, from Sun to Sat, determined by BIOS. Read-only. 
Month 

    The month from Jan. through Dec. 

Date     The date from 1 to 31 can be keyed in using numeric function keys. 
Year    The year depends on the year of the BIOS.     

The time format is <hour><minute><second>. 

Primary Master/Primary Slave 
Secondary Master/Secondary Slave 
Press PgUp/<+> or PgDn/<

–> to select Manual, None, Auto type.  Note that the 

specifications of your drive must match with the drive table.    The hard disk will not work 
properly if you enter improper information for this category.    If your hard disk drive type is 
not matched or listed, you can use Manual to define your own drive type manually. 

If you select Manual, related drive specifications information are required to be entered.  
Enter the information directly from the keyboard.  This information is provided from the 
documentation of your hard disk. 
If the controller of HDD interface is SCSI, the selection shall be “None”. 
If the controller of HDD interface is CD-ROM, the selection shall be “None” 
Access Mode  The settings are Auto Normal, Large, and LBA. 
Cylinder  

number of cylinders 

Head   number of heads