jetway 875pmaxr2a 사용자 설명서

다운로드
페이지 70
 
 
                                                                                                                                                                                                                                                                                                                                               
 
 
 
32
 
Sets the number of times a second to repeat a keystroke when you hold the key down.    The 
settings are: 6, 8, 10, 12, 15, 20, 24, and 30. 
Typematic Delay (Msec) 
Sets the delay time after the key is held down before is begins to repeat the keystroke.    The 
settings are 250, 500, 750, and 1000. 
Security Option 
This category allows you to limit access to the system and Setup, or just to Setup. 
System 
The system will not boot and access to Setup will be denied if the 
correct password is not entered at the prompt. 
Setup (default)  The system will boot, but access to Setup will be denied if the correct 
password is not entered prompt. 
OS Select For DRAM > 64MB 
Allows OS2 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.   
Set to OS/2 if using more than 64MB and running OS/2. 
 
3-7  Advanced Chipset Features                                             
The Advanced Chipset Features Setup option is used to change the values of the chipset   
registers. These registers control most of the system options in the computer. 
 
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 
Advanced Chipset Features 
 
Item Help 
 
  > DRAM Timing Settings        Press Enter 
    System BIOS Cacheable       Enabled 
    Video BIOS Cacheable        Enabled 
    Memory Hole At 15M-16M      Disabled 
    Delay Transaction           Enabled 
    AGP Transfer Mode           Auto 
    AGP Aperture Size           128MB 
    On-Chip VGA                 Enabled 
    On-Chip Frame Buffer Size   16MB  
     
 
 
 
 
  Menu Level > 
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 
F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults 
 
DRAM Timing Settings 
Please refer to section 3-6-1