jetway 875pmaxr2a 사용자 설명서

 
 
                                                                                                                                                                                                                                                                                                                                               

 

 

This determines the manner in which the monitor is blanked.    The choice are Yes 

→ Video 

will off , and No

→ Video always On. 

Video Off Method 
This determines the manner in which the monitor is blanked. 

DPMS (default) 

Initial display power management signaling. 

Blank Screen 

This option only writes blanks to the video buffer. 

V/H SYNC+Blank  This selection will cause the system to turn off the vertical and 

horizontal synchronization ports and write blanks to the video 
buffer. 

Modem Use IRQ 
This determines the IRQ in which the MODEM can use. 
The settings are: 3, 4, 5, 7, 9, 10, 11, NA. 
Power Button Function 
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off 
state.    The settings are: Delay 4 Sec, Instant-Off. 

Wake-Up by PCI card /Power On by Ring 
During Disabled, the system will ignore any incoming call from the PCI card/modem. 
During Enabled, the system will boot up if there’s an incoming call from the PCI card 
/modem. 
Wake-Up on RTC Alarm 
This function is for setting date and time for your computer to boot up.    During Disabled, 
you cannot use this function.    During Enabled, choose the Date and Time Alarm: 

Date(of month) Alarm 
You can choose which month the system will boot up.    Set to 0, to boot every day. 
Time(hh:mm:ss) Alarm   
You can choose what hour, minute and second the system will boot up. 

Note:  If you have change the setting, you must let the system boot up until it goes to the 

operating system, before this function will work 

PM Timer Reload Events 
Please refer to section 3-9-1