MINOURA t-817 사용자 설명서

Front wheel - Please fit the front wheel into the main gauge as per diagram E.
Rear wheel - Please fit the rear wheel into the main gauge as per diagram F.

Fasten the wheel into place using the quick release skewer fitted to the wheel, ensuring that it is
not over-tightened.

Position the vertical gauge plate between 1 - 3 mm away from the top of the rim and spin the
wheel (see diagram G).  This will detect any flat spots in the wheel
which can then be removed.

Once any flat spots have been removed, position the two horizontal
gauge bolts between 1 - 3 mm away from each side of the rim and
spin the wheel (see diagram G).  This will detect any buckles in the
wheel which can then be removed.

Once you have finished using the T-817 truing stand it will fold down for easy storage.
Unlock the main gauge as per diagram D and fold flat.  The gauge stay will fold down against the
stand for easy storage.  Removal of the gauge plate and bolts is optional.