Panasonic KX-MC6040 작동 가이드
1. Introduction and Installation
13
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
3
Press {Menu} to exit.
1.11 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
Menu} i {#}{1}{0}{3} i {Set}
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {Flash}.
L
To erase a number, press {Back}.
3
{
Set}
4
Press {Menu} to exit.
1.12 Configuring the unit to
access the LAN
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
the IP address, subnet mask, and default
gateway.
1.12.1 Setting up automatically with a
DHCP server
DHCP server
Your situation:
–
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
computer, turn the power switch ON.
L
The IP address, subnet mask, and default
gateway will be set automatically.
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with.
you want to use it with.
1.13 Installing Multi-Function
Station
Station
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
L
Software features and appearance are subject to
change without notice.
change without notice.
Warning:
L
To assure continued emission limit compliance;
–
–
use only shielded USB cable (example: Hi-Speed
USB 2.0 certified cable).
USB 2.0 certified cable).
–
use only shielded LAN cable (category 5 straight
cable).
cable).
L
To protect the unit, use only shielded USB cable in
areas where thunderstorms occur.
areas where thunderstorms occur.
Note:
L
A USB cable is not supplied. Please purchase a
shielded Type-A male/Type-B male USB cable.
shielded Type-A male/Type-B male USB cable.
1
Start Windows
®
and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista
Vista
®
users, you must be logged in as an
administrator in order to install Multi-Function
Station.
Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
drive.
3
[
Easy Installation]
L
The installation will start automatically.
4
When the setup program starts, follow the on-screen
instructions.
instructions.
5
The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L
The [Connect Device] dialog box will appear.
2. Connect the unit to a computer with the USB cable
(
1), then click [Next].
3. Click [Install], then follow the on-screen
instructions.
L
The files will be copied to your computer.
For LAN connection:
1. [Connect via the Network.] i [Next]
L
The [Select a Network Device] dialog box will
appear.
appear.
2. Check [Select in the searched list] and select the
unit from the list.
3. [Next]
4. Click [Install], then follow the on-screen
instructions.
L
The files will be copied to your computer.
1
MC6040-PNQW1437ZA-QRG-en.book Page 13 Wednesday, July 16, 2008 3:31 PM