Panasonic DP-C354 작동 가이드
4
Before executing the procedures
described below, make sure the Print
On Line LED is lit.
described below, make sure the Print
On Line LED is lit.
1
Press the Function key.
2
Select "General Settings".
3
Select "09 Key Operator Mode".
4
Enter the Key Operator's Password
(8 digits), and then select "OK".
5
1
2
Follow the procedure below if your network is not configured with the DHCP server, and the TCP/IP parameters must be
setup manually.
- IP Address
- Subnet Mask
- Default Gateway
- DNS Server
setup manually.
- IP Address
- Subnet Mask
- Default Gateway
- DNS Server
1
2
●
Default password is "00000000".
To change this password, open "85 Key
Operator Password" in the General
Setting (For Key Operator), and then re-
enter the new password.
To change this password, open "85 Key
Operator Password" in the General
Setting (For Key Operator), and then re-
enter the new password.
Function key
Print On Line LED
●
Please wait until the Print On Line LED is
ON before pressing the Function key.
ON before pressing the Function key.
Select "04 Network Settings".
Setting up the Network Configuration
Network Configuration
02_07.pmd
10/11/2006, 08:50
4