Hitachi CP-A300NM 사용자 설명서

51

SCREEN menu

(Continued)

(6)  The current name will be displayed on 

the rst line. Use the ▲/▼/◄/► buttons 

and the ENTER or INPUT button to 

select and enter characters. To erase 1 

character at one time, press the RESET 

button or press the ◄ and INPUT button 

at the same time. Also if you move the 

cursor to DELETE or ALL CLEAR on 

screen and press the ENTER or INPUT 

button, 1 character or all characters will 

be erased. The name can be a maximum 

of 16 characters.

(7)  To change an already inserted character, 

press the ▲ button to move the cursor to 

the rst line, and use the ◄/► buttons to 

move the cursor on the character to be 

changed. 

After pressing the ENTER or INPUT button, the character is 

selected.  Then, follow the same procedure as described at the 

item (6) above.

(8)  To nish entering text, move the cursor to the OK on screen and 

press the ►, ENTER or INPUT button. To revert to the previous 

name without saving changes, move the cursor to the CANCEL 

on screen and press the ◄, ENTER or INPUT button.

Using the ▲/▼ cursor buttons switches the mode for the template 

screen.

Press the ► cursor (or the ENTER) button to display the selected 

template, and press the ◄ cursor button to close the displayed 

screen.

The last selected template is displayed when the MY BUTTON

allocated to the TEMPLATE function is pressed 

( 57).

TEST PATTERN Ù DOT-LINE1 Ù DOT-LINE2 Ù DOT-LINE3

      Ú                                                                               Ú

 MAP2 Ù MAP1 Ù CIRCLE2 Ù CIRCLE1 Ù DOT-LINE4

You can turn a map upside down and scroll it horizontally when 

MAP1 or MAP2 is selected. To invert or scroll the map, display 

the guidance by pressing the RESET button on the remote three 

seconds or more when MAP1 or MAP2 appears.

(continued on next page)