Panasonic KX-P8420 설치 가이드

7) Press Enter.  The current IP address assigned to the KX-P8420 is displayed.
8) Use the 

5 and 3 to change the IP address to the desired address.  Start from the

rightmost digit and work your way left.  

5 will increase the digit over the cursor, 3

will shift the cursor one digit to the left.

9) Press Enter and “Ethernet Subnet Mask” is displayed.
10)  Press Enter and the current Subnet mask assigned to the KX-P8420 is displayed.
11)  Use the 

5 and 3 to change the Subnet mask to the desired Subnet mask.  Start

from the rightmost digit and work your way left.  

5 will increase the digit over the

cursor, 

3 will shift the cursor one digit to the left.

12)  Press Enter and “Gateway Address” is displayed.
13)  Press Enter and the current Gateway address is displayed.
14)  Use the 

5 and 3 to change the Gateway to the desired Gateway.  Start from the

rightmost digit and work your way left.  

5 will increase the digit over the cursor,

3will shift the cursor one digit to the left.

15)  Press Enter and “AppleTalk Setup” is displayed.
16)  Press 

5 one time and “IPX/SPX Setup” is displayed.

17)  Press Enter and “Enable IPX/SPX?” is displayed.
18)  Press Enter and “No” is displayed.
19)  Press 

5 one time to change “No” to “Yes”.

20)  Press Enter and “Initializing Network” is displayed for a short time.  Afterwards the

KX-P8420 will reinitialize and return to a Ready state.  The KX-P8420 is now setup
with TCP\IP and IPX\SPX enabled, supporting 802.2, 802.3, Ethernet II and Ethernet
SNAP frame types.  Both Bindery and NDS are also enabled.

Creating and configuring the KX-P8420 print server and queue on the NetWare
server using Pconsole.

1) Execute Pconsole.exe located in the public directory of the SYS volume on the

NetWare server.

2) Highlight “Print Servers” and press Enter.  A window containing a list of available

Print servers will be displayed.