Panasonic DP-MB350 작동 가이드
9. Programmable Features
67
9.4 Copy features
Feature/Code
Selection
Setting the paper input tray to
use for copy
{#}{
use for copy
{#}{
4}{6}{0}
This feature will be displayed only when the lower input tray is installed (page
79).
{
79).
{
1} “
#1” (default): Standard input tray
{
2} “
#2”: Lower input tray
{
3} “
#1+#2”
Note:
L
To select “
#2”, select “Plain Paper” or “Thin Paper” for the recording
paper type setting (feature #383 on page 60).
L
To select “
#1+#2”,
–
select the same paper size for the standard input tray (feature #380 on
page 59) and lower input tray (feature #382 on page 59). If either is
changed, “
page 59) and lower input tray (feature #382 on page 59). If either is
changed, “
#1” will be selected automatically.
–
select “
Plain Paper” or “Thin Paper” for the recording paper type
setting (feature #383 on page 60).
L
If the copy input tray prompt (feature #471 on page 68) is activated, it
overrides this feature.
overrides this feature.
Changing the default copy
resolution
{#}{
resolution
{#}{
4}{6}{1}
To change the default resolution setting for copying.
{
{
1} “
Text/Photo” (default): For documents containing both text and
photographs.
{
{
2} “
Text”: For documents containing only text.
{
3} “
Photo”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{
layout setting
{#}{
4}{6}{7}
{
0} “
Disabled” (default): Deactivates this feature.
{
1} “
Enabled”: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{
setting
{#}{
4}{6}{8}
{
0} “
Disabled” (default): Deactivates this feature.
{
1} “
Enabled”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
setting
{#}{
4}{6}{9}
{
0} “
Disabled” (default): Deactivates this feature.
{
1} “
Enabled”: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{
setting
{#}{
4}{7}{0}
{
0} “
Disabled” (default): Deactivates this feature.
{
1} “
Enabled”: The unit will hold the previous setting.
Note:
L
When this feature is activated, it will be effective for the following:
–
–
When making 1-sided originals into 2-sided copies (page 38).
–
When making 2-sided originals into 2-sided copies (page 39).
L
Even if this feature is activated, it will not be effective when making 2-sided
originals into 1-sided copies (page 39).
originals into 1-sided copies (page 39).
L
When making 2-sided originals into 2-sided copies, the original document
settings will be reset even if this feature is activated. See step 2 to 4 on page
39 to change the setting again.
settings will be reset even if this feature is activated. See step 2 to 4 on page
39 to change the setting again.