Panasonic DP-2310 작동 가이드

다운로드
페이지 176
38
Internet Fax Features
Setup (SMTP Mail Server/POP3 Client)
To install your machine as SMTP Mail Server, the following network parameters need to be programmed on your network 
and on your machine.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• Host  Name
• TCP/IP Address of the DNS Server (if not available, see note 2)
• Email Address of your machine (see note 1)
• Name or IP Address of the Default SMTP mail server
• SMTP Authentication Name (when the authentication with the SMTP server is required)
• SMTP Authentication Password (when the authentication with the SMTP server is required)
Email (from your machine to a PC) and Direct IFAX XMT Transmission 
Email (from a PC to your machine) and Direct IFAX XMT Reception
NOTE
1. To function as SMTP mail server, your machine's email address must include its unique Host 
name within your company domain. This unique Host name must be registered within your 
network’s DNS (Domain Name System) server. 
 
Example: Internet_Fax@fax01.panasonic.com
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter 
the SMTP Server Name.
 
If the DNS Server is not available, change the (DNS server address) of General Settings to 
“No” (
 
 
, Input ID Code, 
 
). Then the machine will prompt you to enter the IP Address of 
the SMTP Server.
ifaxuser@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
Gateway(Router)
popuser001@panasonic.com
SMTP
POP3
Direct IFAX XMT
ifaxuser@fax02.panasonic.com
ifaxuser@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
Gateway(Router)
popuser001@panasonic.com
SMTP
Direct IFAX XMT
ifaxuser@fax02.panasonic.com
FUNCTION
GENERAL SETTINGS
 Key Operator Mode
OK
DNS server address