Panasonic SV-P10U 작동 가이드

ª

≥When the Card is being read, do not remove the Card, 

turn off the power, or subject it to vibration or impact.

≥Do not leave the Card in places where there is high 

temperature or direct sunlight, or where electromagnetic 
waves or static electricity are easily generated.

≥Do not bend or drop the Card. The Card or the recorded 

content may be damaged.

≥After use, be sure to remove the Card from the SD 

Mobile Printer and pack the card back into its original 
case.

≥Do not touch the terminals on the back of the Card with 

your fingers. Do not allow dirt, dust or water to enter it.

≥Improper operation may cause the data stored on a card 

to be damaged or erased. We shall not be liable for such 
loss by any means.

ª

≥The SD Memory Card has a write-protect switch. Sliding 

the switch to [LOCK] prevents the recording of data to 
the card as well as the deletion of data from the card. 
Sliding back the switch permits such operations.

ª

≥When spraying or using insecticides or other volatile 

solvents in the vicinity of the SD Mobile Printer, be 
careful not to allow any to come into contact with the 
printer. If such solvents come into contact with the 
printer, they can damage the outer case and cause the 
surface to peel. Do not allow rubber or plastic products 
to be in contact with the printer for extended periods of 
time.

≥When not using the SD Mobile Printer for extended 

periods of time, turn off the power and disconnect the 
Power Cable from the outlet to conserve energy. (A 
minute amount of current is consumed even when the 
SD Mobile Printer power is off.) 

≥When transporting this printer, during a move for 

example, pack the printer back into the supplied 
Carrying Case. 

ª

≥Install the SD Mobile Printer away from other devices 

that generate magnetic fields.

≥Electromagnetic waves produced in this SD Mobile 

Printer and in televisions, video games, and other 
devices can cause mutual interference, disrupting both 
the display on the television screen and the print picture.

ª

≥ Do not use solvents such as Benzene and paint thinner 

to wipe the printer since they can damage the surface of 
the printer and cause the surface to peel. To clean the 
surface, wipe up any dust with a soft, dry cloth. If the SD 
Mobile Printer is particularly dirty, soak the cloth in mild 
kitchen detergent (neutral) diluted with water and wring 
out thoroughly. Then, wipe off the dust with the cloth and 

wipe again with a dry cloth. When using a synthetic 
cloth, follow the precautions in the cloth’s usage 
instructions.

ª

≥Although it varies with the ambient temperature, if the 

internal temperature of the SD Mobile Printer rises 
above a certain level while printing, the [ERROR] Lamp 
lights (or flashes). In this situation, the printing operation 
will halt temporarily. This is not a malfunction. After 
waiting for a few minutes for the temperature to drop, the 
SD Mobile Printer will automatically resume printing. 

ª

≥When a bottle is taken out from a refrigerator in summer 

and left standing for a while for instance, droplets of 
water will form on it. This phenomenon is known as 
condensation. Condensation will form if the printer or Ink 
Cassette/Paper Set is moved to a location with a 
considerable difference in temperature or humidity, such 
as:

-A high-humidity location, such as one filled with 

steam

-When suddenly moved from an air-conditioned 

environment to one with high temperatures and high 
humidity

-A room that has just been heated

If condensation occurs, Printer cannot be used. Turn the 
power on and wait for 1 hours. If the paper or rollers are 
damp with condensation, the printed surface that is 
produced may be degraded.

ª

If a line appears across a printed picture and pictures 
cannot be printed clearly, the Thermal head, located in the 
insertion portion of the Ink Cassette, may be dirty. In this 
case, clean it with the auxiliary Head Cleaner.

≥You can use a Head Cleaner about 150 times.

SDP1U.book  21 ページ  ２００２年１月２８日 月曜日 午後７時４８分