Sony HT-CT290 사용자 매뉴얼
10
US
VOICE (page 15)
MOVIE/MUSIC (page 14)
Also used for turning on or off the
auto standby function (page 20).
auto standby function (page 20).
CLEAR AUDIO+ (page 14)
Also used for entering the Secure
Link mode (page 20).
Link mode (page 20).
* The AUDIO,
+, and buttons have
a tactile dot. Use it as a guide during
operation.
operation.
Basic connections and
preparation
preparation
Refer to Startup Guide (separate
document).
document).
Mounting the Bar
Speaker on a wall
Speaker on a wall
You can mount the Bar Speaker on a
wall.
wall.
• Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely to two studs in the wall beam.
Install the Bar Speaker horizontally, hung
by screws in studs in a continuous flat
section of the wall.
strength. As a plasterboard wall is
especially fragile, attach the screws
securely to two studs in the wall beam.
Install the Bar Speaker horizontally, hung
by screws in studs in a continuous flat
section of the wall.
• Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during the
installation.
pay special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
Installing the system
Note