Concord 3045 사용자 가이드

— 20 —

Taking Pictures

Taking Pictures With Self-Timer

Use the self-timer to set a delay between the time the shutter button is pressed and the 
time the image is captured. 

1.   Turn the Mode Dial to Auto (        ) or Manual (        ) Mode.
2.   Press the Self-Timer button (      ), and the Self-Timer icon (      ) will appear    
 

on the LCD.

3.   Place the camera on a fl at surface or tripod.
4.   Use the LCd to compose the picture, and then press the Shutter button to    
 

activate the Self-Timer.

 

•   The Self-Timer Lamp will blink until the image is cap tured.

Change the Self-Timer delay

The Self-Timer delay is set to 10 seconds by default. 
You may change the Self-Timer delay ranging from 2 
seconds to 10 seconds through the following steps.

1  Turn the Mode dial to Auto 

 or Manual 

 

mode.

2 Press 

MENU. 

3  Press the Right or Left button until the SETTING 

icon (  

 ) is highlighted.

4 Press 

the 

Up or Down button to select the SELF 

TIMER item.

5 Press 

the 

SET button to enter the SELF TIMER 

submenu.

6 Press 

the 

Up or Down button to select the desired 

self timer delay: 2 ~ 10 seconds.

7 Press 

the 

SET button save the setting.

8 Press 

the 

MENU button to exit the menu.

NOTE: Press 

 to cancel the self-timer at any    

 

time.

Taking Continuous Pictures

This feature enables the camera to capture a continous series of picture while the Shut-
ter button is pressed down.

1.   Turn the Mode Dial to Auto ( 

 ) or Manual ( 

 ) Mode.

2.   Press the Continous Shot ( 

 ) Button. The Continuous Shot icon ( 

) will ap 

 

pear on the LCD.

3.   Press the Shutter Button to capture the pictures.

Note:
•   The LCD will be blank when the images are taken in the Continuous Shot Mode.
•   The camera will take 5 pictures in a row when the Shutter Button is pressed.
•   Flash will be deactivated in the Continuous Shot Mode.