Philips RI9913 RI9913/06 사용자 설명서

103

BREW UNIT MISS.

BREW UNIT BLOCK.

DREGDRAWER MISS.

GRINDER BLOCKED

No message is displayed

The automatic coffee brewing
does not start

The automatic coffee brewing
does not start

 Water is dispensed instead of
coffee

Steam and hot water are not
dispensed

Coffee is dispensed too quickly

Coffee is dispensed too slowly

Coffee is not hot enough

Coffee is not creamy enough

The machine coffee brewing is
reduced, it takes longer to heat
and the dispensing is not
sufficient
The central unit cannot be
removed

The machine is not getting power

The service door is open

Pre-ground coffee selection button
has been pressed, but the relevant
container is empty
The steam/hot water spout hole
is clogged

Grinding too coarse

Grinding too fine

The central unit filter is clogged

The cup has not been preheated

The coffee blend is not suitable
or is not fresh. Grinding is not
correct (too fine or too coarse)

Descaling the machine

The central unit has not been
correctly positioned

Turn the main switch on, check
plug and fuse
Close the service door is
Properly fit and lock the central
unit
Clean the central unit (see page
84)

Fill with water or coffee beans
and restart the cycle

Fit the coffee grounds container
properly

Service the coffee grinder (see

page 85)

Fill  one measuring spoon of
pre-ground coffee

Clear the hole with the aid of a
thin needle

Adjust the grinder on a finer
grinding, e.g. from 5 to 3
Adjust the grinder on a coarser
grinding, e.g. from 5 to 7
Clean the filter

Heat the cup on the heating
plate

Try another coffee blend

Descale the machine, as

described at page 85

Switch the machine on, close
the service door, fit the coffee
grounds container and wait until
the machine resets.

WATERTANK EMPTY
COF. BEANS EMPTY