u-blox Malmo AB 070201 사용자 설명서
15
2.5 Interfacing
Examples
Example 1 – connection of input/output pins
Example 2 – Input/output pins connected to a Host CPU
It is recommended to use a serial resistance with a 10 kohm value between the host CPU
and the connectBlue module for all input and output pins.
and the connectBlue module for all input and output pins.
NOTE! The RED/Mode pin is a combined output/input pin. The Mode input is only
active at power up of the unit.
active at power up of the unit.
NOTE! The GREEN/Switch 1 pin is a combined output/input pin. The Switch 1 input is
only active at power up of the unit.
only active at power up of the unit.