u-blox Malmo AB 070201 사용자 설명서
26
7.4 Using
Board-to-Board
Connectors
Reserved Area
Make place for the 20-pin 2 mm pitch pin connector as indicated in chapter 7.2. This allows
you to use a standard connectBlue OEM Serial Port Adapter even tough you are not using
this connector. Contact connectBlue if there is a requirement to used this reserved area for
components.
you to use a standard connectBlue OEM Serial Port Adapter even tough you are not using
this connector. Contact connectBlue if there is a requirement to used this reserved area for
components.
Using the SEI-120-02-GF-S-M-AB Connector from Samtec
This connector has a profile height of 1.65 mm and this has to be considered if components
are to be mounted on the motherboard under the Serial Port Adapter board.
are to be mounted on the motherboard under the Serial Port Adapter board.
The connector has 2 mm threaded inserts that fit with the mounting holes in the board. You
may screw the Serial Port board directly into this inserts. If you want to have a tighter and
more secure mounting you may use longer screws and secure it using a nut on the backside
of the motherboard.
may screw the Serial Port board directly into this inserts. If you want to have a tighter and
more secure mounting you may use longer screws and secure it using a nut on the backside
of the motherboard.
Chapter 2 contains more information about the connector, necessary measurements on the
motherboard and the electrical interface.
motherboard and the electrical interface.
Using the FSI-120-03-G-D-M-AB connector from Samtec
This connector has a height of 3.0 mm and this has to be considered if components are to be
mounted on the motherboard under the Serial Port Adapter board.
mounted on the motherboard under the Serial Port Adapter board.
The connector has 2 mm threaded inserts that fit with the mounting holes in the board. You
may screw the Serial Port board directly into this inserts. If you want to have a tighter and
more secure mounting you may use longer screws and secure it using a nut on the backside
of the motherboard.
may screw the Serial Port board directly into this inserts. If you want to have a tighter and
more secure mounting you may use longer screws and secure it using a nut on the backside
of the motherboard.
Chapter 2 contains more information about the connectors, mounting measurements and the
electrical interface.
electrical interface.