Raytheon Anschuetz GmbH High Seas Products MTX9 사용자 설명서
Chapter 1: Overview
1
Chapter 1: Overview
1.1 Introduction
This handbook provides instructions to assist you in the installation and set up
of the following radar scanners:
of the following radar scanners:
2D
18" 2 kW Radome Scanner
4D
24" 4 k WRadome Scanner
5S
48" 4 kW Open Array Scanner
xS
48" 10 kW Open Array Scanner
2D, 4D, 5S and xS scanner units may be connected to RL70, RL70RC, R70, or
R70RC display units. In addition the 2D and 4D scanner units may be
connected to SL70, or Autohelm 7" LCD display.
R70RC display units. In addition the 2D and 4D scanner units may be
connected to SL70, or Autohelm 7" LCD display.
A typical Pathfinder Radar system is illustrated below.
NMEA
SeaTalk
Display Unit
Distribution Panel
D4288-2
Scanner
12/24V Supply
12V Supply
12V Supply
Junction
Box
GPS
Compass
CAUTION
Do not use the 48" Open Array Scanner with an SL70 or Autohelm 7”
display unit. Failure to observe this may result in permanent damage to
these display units.
Do not use the 48" Open Array Scanner with an SL70 or Autohelm 7”
display unit. Failure to observe this may result in permanent damage to
these display units.
This handbook is divided into three chapters as follows:
Chapter One provides an overview of the scanner installation. It includes
sections on Unpacking and Inspecting the Components, Selecting the Scanner
sections on Unpacking and Inspecting the Components, Selecting the Scanner
154_3c1.p65
13/12/99, 17:01
1