Omnitron iConverter T3/E3 8743-1-DW 사용자 설명서
제품 코드
8743-1-DW
iConverter
iConverter
®
■ T3 (DS3) or E3 Coax to fiber media converter
■ Supports B3ZS for T3 (DS3) and HDB3 for E3 codes
■ Framing independent; supports framed or unframed
and channelized or fractional unchannelized data
■ Supports dual fiber and single-fiber with distances of up
to 120km and 40km respectively
■ Supports Small Form Pluggable (SFP) transceivers with
standard and CWDM wavelengths
■ Supports SFP Digital Diagnostic Monitoring Interface
(DDMI) bus
■ Supports multimode and single-mode fiber with ST, SC
and LC connectors
■ Supports RG-59 75 ohms coax interface with short-haul
and long-haul build-out options
■ Features user-selectable local and remote loopback
modes and Force 1s (AIS) to Coax and Fiber
■ SNMP management via NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
■ Management is available with the addition of a
management module to the chassis
■ Modules are hot-swappable and can be used in the
19-Module, 5-Module, 2-Module or 1-Module iConverter
chassis
■ LED displays for immediate visual status of each port
■ Lifetime Warranty and free 24/7 Technical Support
iConverter
T3/E3
T3/E3 Managed Media Converter
The iConverter T3/E3 media converter provides standard T3
(44.736Mbps) or E3 (34.368Mbps) coax to fiber conversion and
can be used to connect to devices such as PBXs, multiplexers,
routers and video servers via fiber. T3/E3 media converters
operate in pairs, extending distances over fiber, which improves
noise immunity, quality of service, intrusion protection and
network security.
The T3/E3 supports fixed fiber and Small Form Pluggable
The T3/E3 supports fixed fiber and Small Form Pluggable
(SFP) transceivers, enabling adaptability to different fiber types,
distances and wavelengths, providing maximum flexibility
across a variety of network architectures and topologies.
Support for SFP transceivers increases the bandwidth capacity
of fiber access infrastructure by incorporating Coarse Wave
Division Multiplexing (CWDM) technology. CWDM SFPs
provide wavelength conversion enabling multiplexing of up
to 16 wavelengths on the same fiber pair. The same media
converter can utilize a variety of SFPs for different wavelengths
and distances, reducing costs and simplifying inventories.
The T3/E3 also supports a variety of fixed fiber connectors for
The T3/E3 also supports a variety of fixed fiber connectors for
multimode, single-mode and single-mode single-fiber.
Individual coax and fiber port access can be controlled,
Individual coax and fiber port access can be controlled,
providing the network administrator with an easy mechanism
for controlling usage and access to the network when installed
in a chassis with network management.
The T3/E3 features extensive local and remote loopback
The T3/E3 features extensive local and remote loopback
user-selectable diagnostic modes. Local loopback facilitates
individual coax or fiber loopback operations. Remote loopback
facilitates setting a remote T3/E3 converter to loopback
mode, in order to test the integrity of the fiber and the remote
converter, eliminating the cost of external hardware or support
personnel at each end of the link.
Additional diagnostic features include forcing of all 1s data
Additional diagnostic features include forcing of all 1s data
patterns, Alarm Indication Signal (AIS), to the coax or fiber
interfaces and generating and monitoring a Pseudo Random
Bit Sequence (PRBS) per ITU O.151 specification. These
diagnostic features combined with the informative and easy-
to-read LED display facilitate quick installation, fault detection,
isolation and correction.
The iConverter T3/E3 is available as a compact, unmanaged
The iConverter T3/E3 is available as a compact, unmanaged
standalone unit or as a chassis managed plug-in module. The
hot-swappable plug-in module can be mounted in a 19-Module
(2U high) or 5-Module (1U high) rack-mountable chassis. It
can also be mounted in a 2-Module or 1-Module powered
chassis. As a standalone unit, the T3/E3 is available as a wall-
mount unit. The wall-mount models are DC powered and are
available with an external AC/DC power adapter or a terminal
connector for DC power.
KEY FEATURES