Areca ARC-4036 전단
ARC-4036
SAS 2.0 is designed for backward compatibility
with SAS 1.0, twice speed data transfer 6Gb/s
Per physical link than previous available. The
SAS 2.0 interface supports both 6Gb/s SAS 2.0
disk drives for data-intensive applications, and
6Gb/s SATA drives for low-cost bulk storage of
reference data. Applications can be optimized for
cost/performance through the use of both SAS
and SATA drive types. The ARC-4036 JBOD
includes 8 internal plus 16 external 6Gb/s SAS
ports connection for host and easy expansion.
High performance architecture sets new
boundaries of industry performance expectations:
6Gb/s SAS (600MB/s bandwidth per physical link)
3.0Gb/s SATA (300MB/s bandwidth per physical
link).
with SAS 1.0, twice speed data transfer 6Gb/s
Per physical link than previous available. The
SAS 2.0 interface supports both 6Gb/s SAS 2.0
disk drives for data-intensive applications, and
6Gb/s SATA drives for low-cost bulk storage of
reference data. Applications can be optimized for
cost/performance through the use of both SAS
and SATA drive types. The ARC-4036 JBOD
includes 8 internal plus 16 external 6Gb/s SAS
ports connection for host and easy expansion.
High performance architecture sets new
boundaries of industry performance expectations:
6Gb/s SAS (600MB/s bandwidth per physical link)
3.0Gb/s SATA (300MB/s bandwidth per physical
link).
( 8-Bays 6Gb/s SAS Tower JBOD Enclosure)
The ARC-4036 SAS-to-SAS JBOD
enclosures provides a compact
external storage chassis capable of
accommodating up to 8 6Gb/s,
Serial-Attached SCSI (SAS) drives
or 6Gb/s Serial ATA (SATA) drives.
The Areca SAS expander module
is based on the LSI 28-port
LSISAS2x28 expander IC, SAS-2
chip which features 28 x 6Gb/s
ports and 6G/3G multiplexing, SAS
2.0 zoning, self-configuration,
table-to-table routing, and an
integrated PPC processor for
SES-2 and enclosure management
support. Each ARC-4036 compact
tower JBOD connects to the host
system through two 4-lanes SAS
connectors (Host In) and two
4-lanes SAS connectors (Exp. Out)
to the next SAS-to-SAS JBOD
enclosure. It is used to enhance
the ARC-8040 RAID subsystem by
allowing support for more than 8
internal hard disk drives.
Configuration and environmental
information is accessible either via
in-band (SES-2 over SMP) or
out-of-band serial port.
enclosures provides a compact
external storage chassis capable of
accommodating up to 8 6Gb/s,
Serial-Attached SCSI (SAS) drives
or 6Gb/s Serial ATA (SATA) drives.
The Areca SAS expander module
is based on the LSI 28-port
LSISAS2x28 expander IC, SAS-2
chip which features 28 x 6Gb/s
ports and 6G/3G multiplexing, SAS
2.0 zoning, self-configuration,
table-to-table routing, and an
integrated PPC processor for
SES-2 and enclosure management
support. Each ARC-4036 compact
tower JBOD connects to the host
system through two 4-lanes SAS
connectors (Host In) and two
4-lanes SAS connectors (Exp. Out)
to the next SAS-to-SAS JBOD
enclosure. It is used to enhance
the ARC-8040 RAID subsystem by
allowing support for more than 8
internal hard disk drives.
Configuration and environmental
information is accessible either via
in-band (SES-2 over SMP) or
out-of-band serial port.
Easy Management
Overview
SAS for Maximum Scalability
The expander box contains an embedded
expander manager that can access via in-band
SES-2 over SMP protocol and out-of band
RS-232 port. An out-of-band serial port is
available for managing the configuration and
monitoring the expander. The Areca expander
firmware and EPLD has implemented the SES-2
protocol and disk activity map to the individual
fault/activity status indicator on the backplanes. It
has implemented autonomous chassis
management of power supply status connectors,
expander manager that can access via in-band
SES-2 over SMP protocol and out-of band
RS-232 port. An out-of-band serial port is
available for managing the configuration and
monitoring the expander. The Areca expander
firmware and EPLD has implemented the SES-2
protocol and disk activity map to the individual
fault/activity status indicator on the backplanes. It
has implemented autonomous chassis
management of power supply status connectors,
Maximum Interoperability
Areca presents its ultra-high performance and
high reliability 6Gb/s SAS expander module for a
cost-effective and enterprise-class JBOD storage
enclosure. A 6Gb/s SAS expander module literally
expands the number of end devices that you can
connect together. Expander devices, typically
embedded into an expander module to connect
system backplane, support large configurations of
SAS end devices, including SAS host/RAID
adapters and SAS and SATA disk drives. The
SAS protocol defines a mechanism that has been
implemented in the SAS expanders to guarantee
fair access between drives in a domain. The
ARC-4060 is ideal for 6Gb/s SAS storage
systems with external interfaces and get the
benefits of more storage capacity. The type and
total amount of drives you use are based on the
host interface in the server that the JBOD is
connected. Host-based RAID configuration is
supported via an external SAS/Fibre/iSCSI/PCIe
2.0 to 6Gb/s SAS RAID controller, external series
6Gb/s SAS RAID and SAS host adapters.
high reliability 6Gb/s SAS expander module for a
cost-effective and enterprise-class JBOD storage
enclosure. A 6Gb/s SAS expander module literally
expands the number of end devices that you can
connect together. Expander devices, typically
embedded into an expander module to connect
system backplane, support large configurations of
SAS end devices, including SAS host/RAID
adapters and SAS and SATA disk drives. The
SAS protocol defines a mechanism that has been
implemented in the SAS expanders to guarantee
fair access between drives in a domain. The
ARC-4060 is ideal for 6Gb/s SAS storage
systems with external interfaces and get the
benefits of more storage capacity. The type and
total amount of drives you use are based on the
host interface in the server that the JBOD is
connected. Host-based RAID configuration is
supported via an external SAS/Fibre/iSCSI/PCIe
2.0 to 6Gb/s SAS RAID controller, external series
6Gb/s SAS RAID and SAS host adapters.
two fan monitor/speed control connectors through
the SES-2 protocol. In data center environments,
identifying issues with drives and environments
are crucial. The hardware monitor can monitor
system voltage and temperature. The warning
message will be shown in alarm buzzer and
respect LED.
the SES-2 protocol. In data center environments,
identifying issues with drives and environments
are crucial. The hardware monitor can monitor
system voltage and temperature. The warning
message will be shown in alarm buzzer and
respect LED.