TP-LINK TD-VG3631 사용자 설명서

 

111 

 

 

Click OK 

Select Never dial a 
connection 

Now, try to log on to the Web-based configuration page again after the above settings have been 
configured. If you still cannot access the configuration page, please restore your Modem Router’s 
factory default settings and reconfigure your Modem Router following the instructions in 

4.1 Login

. 

Please feel free to contact our Technical Support if the problem still exists.   

1) Check to see if all the connectors are connected well, including the telephone line, Ethernet 

cables and power adapter. 

2)  Check to see if you can log on to the web management page of the Modem Router. If you can, 

try the following steps. If you cannot, please set your computer referring to T3 then try to see if 
you can access the Internet. If the problem persists, please go to the next step. 

3) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and 

password are correct. If there are any mistakes, please correct the settings and try again. 

4) If you still cannot access the Internet, please restore your Modem Router to its factory default 

settings and reconfigure your Modem Router by following the instructions in 

4.1 Login

. 

5) Please feel free to contact our Technical Support if the problem still exists. 

)

For more details about Troubleshooting and Technical Support contact information, please log on 
to our Technical Support Website:

 

1)  Plug an external USB hard drive or USB flash disk into the USB port labeled “USB 1/2” on the 

Modem Router. The free space of the plugged USB device should be more than 4MB.