TP-LINK TD-W8920G 사용자 설명서

 

Figure 5-15 

¾  IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface. 

„  IP Address: Enter the Router’s local IP Address, then you can access to the Web-based 

Utility via the IP Address, the default value is 192.168.1.1. 

„  Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0. 

¾  Enable UPnP: If you need the UPnP function, select the check box to enable it. 

¾  Enable IGMP Snooping: If you select the option, please choose the IGMP Mode:: Standard 

Mode or Blocking Mode. 

¾  DHCP Server: These settings allow you to configure the Router‘s Dynamic Host 

Configuration Protocol (DHCP) server function. The DHCP server is enabled by default for 

the Router’s Ethernet LAN interface. DHCP service will supply IP settings to computers which 

 35