TP-LINK TL-SG3210 사용자 설명서

 

The following entries are displayed on this screen:

 



Enter the multicast IP address the desired entry must carry. 

Enter the VLAN ID the desired entry must carry. 

Select the port number the desired entry must carry. 

Select the type the desired entry must carry. 


  All: Displays all multicast IP entries. 



  Static: Displays all static multicast IP entries. 



  Dynamic: Displays all dynamic multicast IP entries. 



Displays multicast IP address. 

Displays the VLAN ID of the multicast group. 

Displays the forward port of the multicast group. 

Displays the type of the multicast IP. 

If the configuration on VLAN Config page and multicast VLAN page is changed, the switch will 
clear up the dynamic multicast addresses in multicast address table and learn new addresses. 

Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned 
by IGMP Snooping. It can enhance the quality and security for information transmission in some 
fixed multicast groups. 

Choose the menu Multicast→Multicast IP→Static Multicast IP to load the following page. 

 

Figure 8-9 Static Multicast IP Table 

107