TP-LINK TL-SL1351 사용자 설명서
03
Gigabit Uplink Unmanaged Switch
Introduction
10/100/1000Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 1000Mbps LED.
1000Mbps. Each has a corresponding 1000Mbps LED.
SFP Port (for TL-SL1351 Only)
Designed to install the SFP module. TL-SL1351 features one individual SFP port.
■
Rear Panel
The rear panel of TL-SL1226 is shown as the following figure.
Grounding Terminal
Power Socket
Power Socket
Figure 1-3 Rear Panel of TL-SL1226
The rear panel of TL-SL1351 is shown as the following figure.
Grounding Terminal
Power Socket
Power Socket
Figure 1-4 Rear Panel of TL-SL1351
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground
the switch through the PE (Protecting Earth1 cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
the switch through the PE (Protecting Earth1 cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
Power Socket
Connect the female connector of the power cord here, and the male connector to
the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz1.
the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz1.
Caution: Please use the provided power cord.