Digitus WLAN Broadband Router DN-7039-A 사용자 설명서
![Digitus](https://files.manualsbrain.com/attachments/f93db5b0c165334809dbd560330d6e6a7b6df1e2/common/fit/150/50/755e3ff851ae558a5b49b382cbaca750643c6b4d518d5a8fc61ebc651728/brand_logo.jpeg)
제품 코드
DN-7039-A
DN-7039-A
108M Wireless Router User Guide
Appendix B: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in
Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s
manual if needed.
Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s
manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click
Control Panel.
2) Double-click
the
Network icon, click on the Configuration tab in the appearing
Network window.
3) Click on the Add button. Select Protocol, and then click Add.
Figure B-1: Add Network Protocol
4) Under Manufacturers on Select Network Protocol page, highlight Microsoft.
Under Network Protocols, highlight TCP/IP. Click OK. TCP/IP protocol will
take effect after reboot.
take effect after reboot.
Figure B-2: Select Network Protocol
2. Configure TCP/IP for your computer
1) On the Windows taskbar, click the Start button, point to Settings, and then click
Control Panel.
2) Double-click
the
Network icon, highlight the bound TCP/IP tab in the appearing
Network window that appears. An example shown in the following figure:
-
56 -