Bosch EVID 3.2T 전단

The loudspeaker shall be a two-way system consisting of two 3.5”
(89mm) low-frequency transducers, a .75” (19mm) high-frequency
transducer, and a frequency-dividing network installed in a vented, line-
array enclosure. The network shall include a passive limiter for both the
low-frequency and high-frequency transducers. The loudspeaker system
shall meet the following performance criteria: Power handling, 150
Watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency
response, 85 Hz – 20 kHz (-10 dB from rated sensitivity); Pressure
sensitivity, 87 dB at one watt, 200 Hz – 10 kHz at one meter; Impedance,
8 ohms nominal, 6 ohms minimum. The enclosure shall be molded of
acrylic butyl styrene. The enclosure shall be 9.2” (234mm) high, 5.1”
(127mm) wide, 6.5” (165mm) deep. The finish shall be a paintable black
or white. The grille shall be zinc plated, powder coated for corrosion
resistance, and restrained with a safety leash. The loudspeaker shall be
adjustable over a range of 100° horizontally and 90° vertically. The support
bracket shall be low profile and integral with the enclosure. The system
shall be weather resistant to MIL Spec 810 and IEC 529 IP 34 test
conditions.  The surface mount loudspeaker shall be the Electro-Voice®
EVID model 3.2.

U.S.A. and Canada only. For customer orders, contact Customer Service at:

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

Other International locations. For customer orders, contact Customer Service at:

For warranty repair or service information, contact the Service Repair department at:

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043

© Telex Communications, Inc. 1/2007
Part Number 38109-981  Rev F

9.2

[233.7]

6.5

[165.1]

5.1

[129.5]

1.67

[42.4]

2.5

[63.5]

3.33

[84.7]

1.0

[25.4]

1.38

[34.9]

Ø0.26 x 4

2.75

[69.9]

Side

Wall Plate

Front

Top

• EVID 12.1 Sub

• MA-3

Microphone Stand Mounting Kit for 3.2

• HS-3

Horizontal Mount Desk Stand for 3.2/4.2

• VS-3

Vertical Mount Desk Stand for 3.2

• AB-ZE Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black

301045-001

Black

301045-002

White

301045-003

Black, Transformer

301045-004

White, Transformer