Intel SSD Pro 2500 180GB SSDSC2BF180H5 사용자 설명서
제품 코드
SSDSC2BF180H5
Intel
®
Solid-State Drive Pro 2500 Series (2.5-inch)
Product Specification
July 2014
20
330711-001US
5.3.2
TCG Opal SSC Support
The Intel SSD Pro 2500 Series drive is a Self-Encrypting Drive (SED) that supports the TCG Opal SSC Specification
Version 2.0 rev 1.0 mandatory commands along with the following features:
Version 2.0 rev 1.0 mandatory commands along with the following features:
PSID (Physical presence Security ID) Revert for SSD Repurposing
AES mode: XTS-AES 256-bit
FIPS 197 certified
Once Opal is activated by user (Locking SP in “Manufactured” state), per Opal specification, ATA Security Features
are not supported by the drive. Word 82, bit 1 and Word 128, bit 0 will indicate
no support (bit = 0). Host should not attempt any ATA Security Features when Opal is activated.
are not supported by the drive. Word 82, bit 1 and Word 128, bit 0 will indicate
no support (bit = 0). Host should not attempt any ATA Security Features when Opal is activated.
The following table indicates changes in ID Device word values when Opal is activated.
Table 18: ID Device Changes with Opal Activation
Word
Description
Value (Opal
Deactivated)
Value (Opal
Activated)
82
Features/Command Sets Support(Bit 1 Security
Support)
746Bh
7469h
89
SECURITY ERASE UNIT Time
0002h
0000h
90
ENHANCED SECURITY ERASE UNIT Time
0001h
0000h
92
Master Password Revision Code
FFFEh
0000h
128
Security Status
0021h
0000h
5.3.3
Windows eDrive*
The Intel SSD Pro 2500 Series allows up to 4 independent user locking ranges with hardware-based 256-bit AES
encryption. If additional locking ranges are needed, Windows eDrive* will support additional ranges enabled with
Windows BitLocker* software encryption.
encryption. If additional locking ranges are needed, Windows eDrive* will support additional ranges enabled with
Windows BitLocker* software encryption.
Note: Microsoft* eDrive support is disabled as Out-of-box factory default setting. Use the Intel SSD Pro
Administrator Tool to enable eDrive support. (Visit
Administrator Tool to enable eDrive support. (Visit
5.4
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the Intel SSD Pro
2500 Series can be reported to the host on request through the Device Statistics log as defined in the ATA
specification.
2500 Series can be reported to the host on request through the Device Statistics log as defined in the ATA
specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is accessible using
READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The following table lists the Device Statistics supported by the Intel SSD Pro 2500 Series.