Intel SSD Pro 2500 180GB SSDSC2BF180H5 사용자 설명서
제품 코드
SSDSC2BF180H5
Intel
®
Solid-State Drive Pro 2500 Series (2.5-inch)
July 2014
Product Specification
330711-001US
23
5.8
SMART Attributes
The following two tables list the SMART attributes supported by the Intel SSD Pro 2500 Series, and the
corresponding status flags and threshold settings.
corresponding status flags and threshold settings.
Table 22: SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
05h
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
number of retired blocks since leaving the
factory (grown defect count).
1
1
0
0
1
0
0 (none)
09h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
1
1
0
0
1
0
0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
cumulative number of power cycle events
over the life of the device.
1
1
0
0
1
0
0 (none)
AAh
Available Reserved Space
1
1
0
0
1
1
10
ABh
Program Fail Count
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
1
1
0
0
1
0
0 (none)
ACh
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
1
1
0
0
1
0
0 (none)
AEh
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
1
1
0
0
1
0
0 (none)