Dynamode 10/100Mbps - 100BaseFX Singlemode Media Converter TT100-TF100SC-S 전단

TT100-TF100SC-S is a Fast Ethernet 

100Base-TX to Fiber 100 Base-FX 

converter. This model features one fiber 

port with SC-S connector, SINGLE 

MODE converter. Other available fibre 

connectors include SC, ST, MT-RJ or 

VF-45 connector and one twisted pair 

port with RJ-45 connector. It converts 

electrical signal from 100Base-TX side 

into optical signal at 100Base-FX side 

and vice versa. The TT100-TF100SC-S 

series converter can be used as a 

standalone unit or as a slide-in module 

to the 19" converter rack (up to 10 

units) for use at a central wiring closet.

Standard

Features STP and Fiber 
connectors

Data transfer rate

Dimension (mm)

Power requirement

Ambient  Temperature

Humidity

Cable 

IEEE802.3u Fast Ethernet 100Base-TX and 
100Base-FX standards

TT100-TF100XX RJ-45 and ST/SC/VF45/MTRJ 
connector (Multi-mode) 

100Mbps

26mm(H) x 71mm(W) x 97mm (D)

1A+5V

 5%C~90%C

 5°C ~ 50°C

UTP : Cat. 5 UTP cable 
Fiber : 50/125, 62.5/125, 100/140m multi-mode
8.3/125, 8.7/125, 9/125, 10/125m single-mode

UTP Cable limitations

Half Duplex : 1m (up to 100m, subject to fiber length) 
Fiber : 50/125, 62.5/125, 100/140m multi-mode 

Duplex Mode 

Full-or Half-duplex mode 

LED 

Pwr, Fdx, FX Link, FX Act, TX Link, TX Act 

FIber Cable limitations

 100Base-TX/FX(multi-mode) network allows 512-bit time 
delay between any two nodes in a collison domain. 

Connecting to 
(Full/Half-duplex) Cable 
Limitations 

Full-duplex (multi-mode) Node to Hub : 
       2Km Hub to Hub : 2Km 
Full-duplex (single-mode) Node to Hub : 
       20Km Hub to Hub : 20Km 
       (30km or 40km also available) 
Half-duplex (multi-mode) Node to Hub : 
       412m Hub to Hub : 412m 
  

Support 10/100 Ethernet UTP.
Other available fiber connectors: SC/ST/MT-RJ/VF-
45 for multi-mode and single-mode.
Standalone or composite applications.