Davis Instruments Vantage Vue Wireless Weather Station DAV-6250EU 데이터 시트

Setup Mode

12

To change the barometric reduction setting:
1. Press + or - to change the barometer 

reduction setting type:
• NOAA (Default Setting) — The 

barometer is reduced to sea level using a 
technique that factors in the humidity and temperature of the column of air.

• ALT SETTING (Altimeter Setting) — The barometer is reduced to sea level using a 

“standard” column of air, often referred to as a “standard atmosphere.”

• NONE — Reports a raw barometric pressure reading unadjusted for elevation/altitude.

2. Press DONE to move to the next screen.

Note: See “Calibrating Barometric Pressure” on page 28 to learn how to fine-tune your barometric 

pressure to a local source.

The Wind Cup Type screen displays if you selected VP2 or WIND in Screen 6 of the Setup 
Mode. This screen does not display if you have selected a Vantage Vue ISS. See “Screen 6: 
Configuring Transmitter IDs” on page 9 for more information. 
The Wind Cup Type screen contains three options: LARGE, SMALL, or OTHER. In most 
Vantage Pro2 anemometer or ISS Installations, LARGE is the cup type that is shipped with all 
Vantage Pro2 anemometers. See the Vantage Pro2 Console Manual for more information.
To change the wind cup type:
1. Press the + and - keys to scroll through the 

three wind cup options. 

2. Press DONE to use the selected setting and 

move to the next screen. 

Note: Do not change the wind cup type from LARGE if you are using the wind cups that were shipped 

with your system.

The tipping spoon in the Vantage Vue rain collector 
has been calibrated at the factory to measure either 
0.01'' or 0.2mm of rain with each tip depending on 
the model. This screen is used at the factory for this 
calibration. The typical user will not need to change 
it and can skip this screen.

Note: This screen will not change the units on your display. To change the units on your display from 

in