Davis Instruments Vantage Vue Wireless Weather Station DAV-6250EU 데이터 시트

Console Diagnostic Mode

38

Enter Setup Mode by pressing and releasing 2ND and pressing SETUP. Keep pressing DONE 
until the “Receiving From...”screen displays. (See “Screen 5: Active Transmitters” on page 8 
for more information.) Wait a few minutes while the console lists all the stations transmitting 
within range. If the console does not detect your transmitter, check the following:
•

Adjust the console antenna so that it is vertical and in line-of-sight the Vantage Vue ISS 
antenna. 

Note: 

The Vantage Vue ISS antenna cannot be adjusted. Ensure that the console antenna is 
vertical.

•

•

Try reducing or increasing the distance between the ISS and the console. They should be 
at least 10 feet (3 meters) apart. Maximum range is 1000’ (300 m) line-of-sight.

Refer to the ISS Installation Manual for instructions on how to check the station for potential 
transmission problems.

In addition to logging weather data, the console continuously monitors the station’s radio 
reception. You may find this information very helpful, especially when you are choosing 
locations for your console and ISS. 
The Console Diagnostics Mode consists of two screens: the Statistical Diagnostic Screen and 
the Reception Diagnostic Screen. 

Note: 

Radio transmission data used by the diagnostic screens clears each day at midnight, except 
for % Good Packet graph data. Diagnostic screens are also cleared if you change your ID or 
go into the Setup Mode.

•

Press and hold TEMP, then press HUM to display the Statistical Diagnostic screen. 

•

Press 2ND and then press CHILL to toggle between the Statistical and Reception 
Diagnostic screens.

•

Press DONE to exit the diagnostic screens.

•

A degree (

°

) sign displays to the right of the last digit in Value 3 (in the area of the 

compass rose, see illustration on next page) of the Reception Diagnostic screen (screen 2) 
to differentiate which screen is currently displayed.