Intel Desktop Board D865GBF BLKD865GBF 사용자 설명서

제품 코드

BLKD865GBF

Intel Desktop Board D865GBF/D865GLC Technical Product Specification

2.8 Connectors

CAUTION

Only the following connectors have overcurrent protection: Back panel and front panel USB,
PS/2, and VGA.

The other internal connectors are not overcurrent protected and should connect only to devices
inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer’s chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.

This section describes the board’s connectors. The connectors can be divided into these groups:

•

Back panel I/O connectors (see page 69)



PS/2 keyboard and mouse



USB (four ports)



Parallel port



Serial port A



VGA port



LAN



Audio (line out, line in, and mic in)

•

Internal I/O connectors (see page 70)



Audio (auxiliary line input, ATAPI CD-ROM, and front panel audio)



Fans [three]



Power



Add-in boards (PCI and AGP)



Parallel ATA IDE



Diskette drive



SCSI hard drive activity LED (optional)



Chassis intrusion



Serial ATA

•

External I/O connectors (see page 79)



Front panel USB (two connector for four ports)



Auxiliary front panel power/sleep/message-waiting LED



Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED,
reset switch, and auxiliary front panel power LED)

✏

NOTE

When installing the D865GLC board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, the
Parallel ATA IDE connectors, and the DIMM sockets.