TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Fully Managed Switch TL-SL5428E 데이터 시트

 

1.  The forward delay parameter and the network diameter are correlated. A too small forward 

delay parameter may result in temporary loops. A too large forward delay may cause a 
network unable to resume the normal state in time. The default value is recommended. 

2.  An adequate hello time parameter can enable the switch to discover the link failures occurred 

in the network without occupying too much network resources. A too large hello time 
parameter may result in normal links being regarded as invalid when packets drop occurred in 
the links, which in turn result in spanning tree being regenerated. A too small hello time 
parameter may result in duplicated configuration being sent frequently, which increases the 
network load of the switches and wastes network resources. The default value is 
recommended. 

3.  A too small max age parameter may result in the switches regenerating spanning trees 

frequently and cause network congestions to be falsely regarded as link problems. A too large 
max age parameter result in the switches unable to find the link problems in time, which in 
turn handicaps spanning trees being regenerated in time and makes the network less 
adaptive. The default value is recommended. 

4.  If the TxHold Count parameter is too large, the number of MSTP packets being sent in each 

hello time may be increased with occupying too much network resources. The default value is 
recommended.  

On this page you can view the related parameters for Spanning Tree function. 

Choose the menu Spanning Tree→STP Config→STP Summary to load the following page. 

 

Figure 7-5 STP Summary 

100