TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Fully Managed Switch TL-SL5428E 데이터 시트
제품 코드
TL-SL5428E
Static Router Ports:
Enter the static router port which is mainly used in the network
with stable topology.
with stable topology.
VLAN Table
VLAN ID Select:
Click the Select button to quick-select the corresponding VLAN ID
based on the ID number you entered.
based on the ID number you entered.
Select:
Select the desired VLAN ID for configuration. It is multi-optional.
VLAN ID:
Displays the VLAN ID.
Router Port Time:
Displays the router port time of the VLAN.
Member Port Time:
Displays the member port time of the VLAN.
Leave Time:
Displays the leave time of the VLAN.
Router Port:
Displays the router port of the VLAN.
Note:
The settings here will be invalid when multicast VLAN is enabled
Configuration procedure:
Step Operation
Description
1 Enable
IGMP
Snooping
function
Required. Enable IGMP Snooping globally on the switch
and for the port on Multicast→IGMP
Snooping→Snooping Config and Port Config page.
and for the port on Multicast→IGMP
Snooping→Snooping Config and Port Config page.
2
Configure the multicast
parameters for VLANs
parameters for VLANs
Optional. Configure the multicast parameters for VLANs on
Multicast→IGMP Snooping→VLAN Config page.
If a VLAN has no multicast parameters configuration, it
indicates the IGMP Snooping is not enabled in the VLAN,
thus the multicast data in the VLAN will be broadcasted.
Multicast→IGMP Snooping→VLAN Config page.
If a VLAN has no multicast parameters configuration, it
indicates the IGMP Snooping is not enabled in the VLAN,
thus the multicast data in the VLAN will be broadcasted.
9.1.3 Port Config
On this page you can configure the IGMP feature for ports of the switch.
When the switch receives IGMP report message, it examines the multicast filtering IP ID
configured on the access port to determine if the port can join the multicast group. If the multicast
IP is not filtered, the switch will add the port to the forward port list of the multicast group.
Otherwise, the switch will drop the IGMP report message. In that way, you can control the
multicast groups that users can access.
configured on the access port to determine if the port can join the multicast group. If the multicast
IP is not filtered, the switch will add the port to the forward port list of the multicast group.
Otherwise, the switch will drop the IGMP report message. In that way, you can control the
multicast groups that users can access.
Choose the menu Multicast →IGMP Snooping →Port Config to load the following page.
138