TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Fully Managed Switch TL-SL5428E 데이터 시트

 

Weight Round Robin Mode. In this mode, packets in all the 
queues are sent in order based on the weight value for each 
queue. The weight value ratio of TC0, TC1, TC2 and TC3 is 
1:2:4:8. 

Strict-Priority + Weight Round Robin Mode. In this mode, this 
switch provides two scheduling groups, SP group and WRR 
group. Queues in SP group and WRR group are scheduled strictly 
based on strict-priority mode while the queues inside WRR group 
follow the WRR mode. In SP+WRR mode, TC3 is in the SP group; 
TC0, TC1 and TC2 belong to the WRR group and the weight value 
ratio of TC0, TC1 and TC2 is 1:2:4. In this way, when scheduling 
queues, the switch allows TC3 to occupy the whole bandwidth 
following the SP mode and the TC0, TC1 and TC2 in the WRR 
group will take up the bandwidth according to their ratio 1:2:4. 

Equal-Mode. In this mode, all the queues occupy the bandwidth 
equally. The weight value ratio of all the queues is 1:1:1:1. 

Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to 
ensure network in working order, can be implemented on Rate Limit and Storm Control pages. 

Rate limit functions to control the ingress/egress traffic rate on each port via configuring the 
available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed 
and utilized.   

Choose the menu QoS→Bandwidth Control→Rate Limit to load the following page. 

 

Figure 10-10 Rate Limit 

166