TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Fully Managed Switch TL-SL5428E 데이터 시트
제품 코드
TL-SL5428E
Event Table
Select:
Select the desired entry for configuration.
Index:
Displays the index number of the entry.
User:
Enter the name of the User or the community to which the
event belongs.
event belongs.
Description:
Give a description to the event for identification.
Type:
Select the event type, which determines the act way of the
network device in response to an event.
network device in response to an event.
None: No processing.
Log: Logging the event.
Notify: Sending trap messages to the management
station.
station.
Log&Notify: Logging the event and sending trap
messages to the management station.
messages to the management station.
Owner:
Enter the name of the device or user that defined the entry.
Status:
Enable/Disable the corresponding event entry.
13.3.3 Alarm Config
On this page, you can configure Statistic Group and Alarm Group for RMON.
Choose the menu SNMP→RMON→Alarm Config to load the following page.
Figure 13-12 Alarm Config
The following entries are displayed on this screen:
Alarm Table
Select:
Select the desired entry for configuration.
Index:
Displays the index number of the entry.
Variable:
Select the alarm variables from the pull-down list.
Port:
Select the port on which the Alarm entry acts.
Sample Type:
Specify the sampling method for the selected variable and
comparing the value against the thresholds.
Absolute: Compares the values directly with the thresholds
comparing the value against the thresholds.
Absolute: Compares the values directly with the thresholds
235