Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 데이터 시트

제품 코드

1-F8075

<Functions of Linkage Menu>

● Select the function name

and return to the Linkage

menu by touching the

R T N b u t t o n . 　 O r t h e

H O M E / E X I T b u t t o n i s

pushed.

<SensorTouch™>

RETURN

REVERSE

Use to reverse the throw direction.

Servo Reverse changes the direction of an

individual servo’s response to a control input.

For CCPM helicopters, be sure to read the

section on Swash AFR before reversing any servos.

With CCPM helicopters, always complete your

servo reversing prior to any other programming.

If you use pre-built Airplane/Sailplane functions

that control multiple servos, it may be confusing

Servo reversing procedure

*Upon setup completion of a new model, check whether or

not each servo is connected to the correct channel.

*Next, determine whether you need to reverse any channels

by moving each stick and/or other control inputs.

1. Move the cursor to the channel you want to

reverse and touch the RTN button to switch

to the data input mode.

2. Select the direction by scrolling the touch

sensor. A confirmation message appears.

[NORM]: Normal
[REV]: Reverse

3. Touch the RTN button to change the

direction. (To terminate input and return to

the original state, touch the S1 button.)

*Repeat the operation above for each channel that must be

reversed.

to tell whether the servo needs to be reversed or a

setting in the function needs to be reversed. See the

instructions for each specialized function for further

details. Always check servo direction prior to every

flight as an additional precaution to confirm proper

model memory, hook ups, and radio function.

(The display screen is an example. The

screen depends on the model type.)

● Select [REVERSE] in the Linkage menu and access

the setup screen shown below by touching the

RTN button.

Scrolling

● Moving cursor

● Selecting mode