Cal Flame LTR20081044 사용자 설명서

Page 8 

Cal Flame 2008 Owner’s Manual

 

LTR20081044, Rev. A

Assemble a 9.5 mm pipe nipple to the 9.5 mm pipe tee using Teflon tape or pipe sealant. Use only sealant that 

1. 

is approved for use on LP gas.
Install the pipe tee assembly to the grill intake pipe. Tighten assembly and align the branch opening of the tee 

2. 

with the hole of the cabinet.
Connect the flexible hose (male end) to the pipe tee.

3. 

Install and secure the side burner into the island by simply setting it in place.

4. 

Connect the female end of the flexible hose to the side burner intake pipe.

5. 

Connect gas supply to the grill.

6. 

Check for gas leaks using soap water solution.

7. 

C

B

A

B

C

A

Connect the last open line to the side burner.

(Use gas rated tape seal on all connections)

Take the other end of "T" adapter with flexible hose attached

and connect to end of male fitting located underneath and at

the back of the grill. (Use gas rated tape seal on all

connections).

Open barbecue door. Install flexible hose with regulator to

gas source, then connect other end to "T" adapter.

Make sure to use gas rated tape seal when installing 

adapter to insure proper seal.

Grill

Items included with barbecue

1) One 9.5 mm "T" adapter

2) Two 9.5 mm hose fittings

Regulator is NOT included with barbecue.

NOTE:  You will need to use a gas rated

              sealer on gas connectors that are not flared.

To gas source

9.5 mm fittings

From Grill

From Side Burner

"T" Adapter (9.5 mm threaded)

To side burner, located

underneath behind burner.

To grill, located

underneath and 

behind grill