Westinghouse CSA (Canada) WHC6000S CSA MODEL 사용자 매뉴얼

18 

1.  Engine Control Switch (RUN/STOP for 

Manual Start Units): 

x RUN - In the RUN position, the switch 

allows the generator to be started (for 
manual start models).

x STOP - In the STOP position, the switch 

stops the engine.

2.  Hour Meter: 

Displays how many hours the 

generator has been run (WHC7500E model).

3.  Main Circuit Breaker: The main circuit 

breaker controls total output of all outlets to 
protect the generator.

4.  120/240-Volt, 30-Amp Twist Lock Outlet 

(NEMA 14-30R): Outlet can supply either 
120V or 240V output.

5.  120-Volt, 20-Amp Duplex Outlets (NEMA 

5-20R): Each outlet is capable of carrying 
a maximum of 20 amps on a single duplex 
outlet or a combination of both receptacles.

6.  20-Amp Circuit Breakers: Each circuit 

breaker limits the current that can be 
delivered through the 120-volt duplex outlets 
to 20 amps.

7.  Ground Terminal: The ground terminal is 

used to ground the generator.

8.  Engine Control Switch (START/RUN/STOP 

x START - When the switch is momentarily 

depressed and held in the START position, 
the electric start motor engages and starts 
the engine. Once the engine starts, release 
the switch. (The switch will automatically go 
to the RUN position.)

x RUN - Once started, the switch will remain 

in the RUN position.

x STOP - To stop the engine, move the switch 

to the STOP position.