Behringer Feedback Destroyer Pro FBQ2496 사용자 설명서

FEEDBACK DESTROYER PRO FBQ2496 User Manual

The FBQ2496 requires one height unit (1 HE) for mounting in a 19" rack. 

Please keep in mind that an additional 10 cm (4") of depth in the back are 

required to enable trouble-free access to the connectors on the rear panel.
For rack installation, please use M6 machine screws and nuts.
Please make sure that your FBQ2496 has enough cooling air, and never put it on 

an amp or other heat-emitting equipment to avoid overheating.

The inputs and outputs on your FEEDBACK DESTROYER PRO are laid out 

completely balanced. Whenever possible, try to establish balanced connections 

to other equipment in order to maximize disturb signal compensation.
MIDI connections (IN/OUT/THRU) are established using the standard DIN 

connectors. Data transmission is achieved using a floating opto-coupler.

For connection of balanced and unbalanced plugs,

ring and sleeve have to be bridged at the stereo plug.

Fig. 8.1: 1/4" TRS connector

For unbalanced use, pin 1 and pin 3 

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

1

2

3

1

2

3

Fig. 8.2: XLR connector