Suunto X9i 사용자 가이드

Bearing (bea): If you are navigating a route from the
Navigation menu, the third shortcut displays the bearing to the
next waypoint. If you have not activated a route and the GPS
is on, the shortcut displays the bearing to the start position
(where the GPS or an activity was switched on). If the GPS is
not on, the shortcut displays the latest acquired bearing.
NOTE: The magnetic sensor of the compass functions for 45

seconds at a time. After this period, the compass goes into

power-saving mode and the message ‘

START

COMPASS

’ is

displayed. To activate the compass again, press START/

DATA.

NOTE: The X9Mi model can be set to display mils instead of degrees by using the

Trek Manager SW.
3.4.2. Calibrating the compass
To ensure that the compass works properly, you need to calibrate it.
Calibrate the compass:
• If it does not seem to work well, for example, when it displays the wrong compass

heading or the heading changes too slowly.

• If your Suunto X9i has been exposed to strong electromagnetic fields, such as

electric lines, loudspeakers and magnets, which can affect the compass operation.

• Before you use it for the first time
• Before you leave for an extended outdoor activity.
To calibrate the compass:

1.In the Set menu, scroll to Calibrate and press ENTER.
The message ‘

ROTATE

360°

HORIZONTAL

’, a set of arrows

and a 30 second timer are displayed.