Python 323 사용자 설명서

11

© 2009 Directed Electronics. All rights reserved.

Advanced Commands: (Level 2)

Press and release the 

button 2 times. The 

 and aux LED’s illumi-

nate indicating Level 2
Note: The transmit LED on the 1-way remote will flash in groups of 2 
to indicate level 2.

Sensor Bypass

Press and release 

 

Performing the sensor bypass command will incrementally bypass sen-
sor operations and be confirmed as follows:

Warn-away Bypass:

s

 The parking lights flash 2 times. The arm 

LED, 1 beep and 1 fault tone play to confirm. Sensors will be 
activated for full trigger levels of impact only.
Warn-away & Full Trigger Bypass:

s

 The parking lights flash 3 

times. The arm LED, 1 beep and 2 fault tones play to confirm. 
Sensors will not be activated for any level of impact.
Sensor Bypass Off:

s

 The parking lights flash 1 time. The arm LED 

and 1 beep play to confirm. Sensors are fully operational.

Note

Sensor bypass can only be performed when the system 
is armed. The 

 LED and a long fault tone plays as an 

alert when performing sensor bypass when the system is 
disarmed. Perform arm command any time to turn sensor 
bypass off. 

Remote Valet 

Press and release 

Enters (or if on, exits) valet mode. The control center LED turns on and