Python 323 사용자 설명서
31
© 2009 Directed Electronics. All rights reserved.
Turn Paging off: The remote will not wake up to check for mes-
s
sages with paging off in the setup remote menu.
Note: The remote will not receive trigger messages from the sys-
tem.
Turn Beeps off: The button beeps can be turned off in the setup
Note: The remote will not receive trigger messages from the sys-
tem.
Turn Beeps off: The button beeps can be turned off in the setup
s
remote menu. The command beeps still play normally.
Responder LE Battery Replacement
+
Battery
Cover
Battery
Clip
Rear View
1
2
1. Slide the battery cover up by ap-
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
from the remote control housing.
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
from the remote control housing.
2. Gently pry up on the battery (or
batteries) to remove it from the holder.
Insert a new battery (or batteries) into
batteries) to remove it from the holder.
Insert a new battery (or batteries) into
the holder and under the clip with the positive (+) side up. Replace the
battery cover. The remote control is now ready for use.
battery cover. The remote control is now ready for use.
1-way Battery Replacement
Using a small
1.
flathead screwdriver,
insert into slot located
at the bottom of the
keypad and carefully
pry the front of the unit
open.
flathead screwdriver,
insert into slot located
at the bottom of the
keypad and carefully
pry the front of the unit
open.
Detail