PYLE Audio PRJV66 사용자 설명서

4

Power consumption: ....................................................... <220 W

Lamp power: .................................................................... 150 W

Color temperature: ......................................................... 9300  K

Lamp life: ....................................................................8000 Hrs

Power requirements: .......................................... 230 VAC/50 Hz

Running current: ................................................................. <2 A

Brightness: ................................................................. 1200 Lm

Resolution.......................................................800*600

Lens: ....................................................................f160mm/F=2.9

Contrast: ............................................................................800:1

Number of Pixels: .............................................................. 1.0 M

Color system: ............................................. NTSC/PAL/SECAM

Keystone-correction: ........................................................... 

15

Max. advisable duration of usage: .............................. 

 

24 Hrs

Projection picture size: ............................................ 50-100 inch

Dimensions: ..................................................310

255

95 mm

Weight: ............................................................................. 6 Kg

Specifications and design may be altered by the manufacturer 
without any communication.

13

Please refer to this chapter when you encounter a problem list prior to contacting your 
dealer.

Problem:                                               Possible solution(s):
No power                                               Projector  not connected to  mains.
                                                               Projector not  turned on.
                                                               Blown fuse.

Remote doesn't operate                          Projector turned on  to quickly after  last 

turn off (needs 5 minutes).

                                                               Batteries defect.
                                                               Aim remote correctly  at IR receiver.

No image                                               Lens  cap not removed.
                                                               Projector turned  off.
                                                               Faulty wiring.
                                                               Selected the  wrong input signal.

Projector turns off  automatically          Air in-and/or outlets  and/or filter
(no more power)                                    are covered or  blocked.

Lamp doesn't function                            Power supply isn't  correct.
                                                               Temperature is too high.
                                                               Defect lamp.

This lamp has a maximum lamp life. The color balance will change when the light intensity 
decreases. The image will also blur. Replace the lamp if this is the case.

Turn the projector of and remove the power cord.

1.   Place the projector on a cloth to put loose parts on.
2.   Turn the screw loose and open the lid.
3.   Remove the 4 screws holding the lamp unit. Pull the unit straight up.
4.   Now replace the lamp and follow the steps (1-4) in opposite order to complete the 

installation.