Pure Digital EVOKE-3 사용자 설명서

1. 

If you have purchased the optional ChargePAK rechargeable battery, insert it into the 
rear compartment before connecting the unit to the mains. Fully extend the aerial then 
connect the unit to the mains using the power cable. 

2. 

Press the Power button, if necessary, to switch the unit on.

3. 

When you see the menu ‘Enable Energy Saving?’ select either ‘On’ or ‘Off’ to switch 
energy saving mode on or off (turn the Tune knob to choose an option and push to select).

 

When energy saving mode is switched on, the radio uses less than 1 Watt power in 
standby because some standby functions such as the remote control and EPG are 
disabled after 70 seconds.

 

You can turn energy saving mode on or off in the Energy saving menu.

 

For more information 

 Energy saving mode: page 15 

EPG : page 7

5. 

Select an autotune to find all the DAB radio stations in your area. Choose from:

United Kingdom 

Scans frequencies in Band III only

Rest of World    

Scans all frequencies in Band III and L-Band.

An autotune starts and tunes to a station when finished.

6. 

To change stations, turn the Tune knob to scroll through the station list, then push the 
knob to tune to the highlighted station.

7. 

Push the DAB/SD/FM/AUX button to listen to SD, FM or the auxilliary input.

You turn the Tune knob to scroll through menus, station or track lists and push the Tune knob 
to select. In most menus if you do not select anything you return to the previous screen.
Alternatively use the equivalent (    + Select) remote control buttons.

Currently selected options in menus and lists are indicated by an asterisk (*).
To exit a menu or menu option press the Info button, alternatively press the Menu button to 
exit to the previous menu.

³

Ò

³

EcoPlus