Turbosound ASPECT TA-880 사용자 설명서

When flying more than one cabinet deep you will need to use 

SW-880H

 swords to suspend 

and correctly position the second and subsequent cabinets. These make use of the internal 
sword boxes in the trapezoidal cabinet in the same way as the flying chain and dagger, and 
ensure that the entire weight of the column is taken through the metalwork and not through 
the woodwork of the cabinet. Note that there are two holes in each end of the flying sword; 
selection of these determines the vertical angle between cabinets and is explained in the 
table and diagrams below.  
 

 

 
1. Lift the first cabinet high enough to allow access to the bottom of the cabinet. Insert 

SW-

880H

 flying swords into the cabinet from the bottom, passing them up through the box, and 

align them with the lower slots in the sword boxes. You will be able to judge the position of 
the sword by looking through the top handle box. 

 

 

 

2. Secure the swords on both sides of the cabinet using 

SL-880

 safety linch-pins.