Toshiba Magnia Z300 사용자 설명서

67

Slide the server out of the rack in the procedure described below, 
while referring to “Before starting operation” on page 48.

1 If the server is running, shut it down and switch off the power.

2 Switch off all the peripheral units connected with the server.

3 Unplug the power cable of the server from the AC outlet or 

UPS (uninterruptible power supply).

4 Unplug all the cables from the server.

5 Loosen the four claw screws which fix the Base Assembly and 

draw out the Base Assembly.

When turning the claw screws, remove the front panel so that you 
do not catch your fingers.

6 Remove the screw (M3) fixing the Base Assembly to the 

server.

Claw 

screw