Telstrat WCMICS VSX Series 사용자 설명서
21
Ending a Call with Audio-Only Participants
Your conference may include a mix of video participants and audio-only
participants. If an audio-only participant hangs up during the call, you need to
disconnect the call from the conference. This is the same as hanging up a
telephone receiver in a regular phone call.
participants. If an audio-only participant hangs up during the call, you need to
disconnect the call from the conference. This is the same as hanging up a
telephone receiver in a regular phone call.
To disconnect the audio-only call:
1. Press
Hang Up on the remote control.
2. If the call is a multipoint call, select VTX Conference Phone from the
Hang Up screen to clear the audio line.
Even if you hang up the video call or the audio-only site hangs up, you still need to hang
up the audio-only call from your system. If you do not disconnect the audio-only call from
the VSX system, you will hear a tone from the telephone through the conference.
up the audio-only call from your system. If you do not disconnect the audio-only call from
the VSX system, you will hear a tone from the telephone through the conference.
Video Conferencing Tips
Read through these quick tips for ideas on how to optimize your video
conferencing experience. You’ll find general tips for a better meeting, as well as
simple suggestions for improving video and audio quality, and for showing
documents.
conferencing experience. You’ll find general tips for a better meeting, as well as
simple suggestions for improving video and audio quality, and for showing
documents.
Tips for Great Meetings
o
Make sure you have the video number(s) of the site you want to call
or that the site is listed in a directory.
or that the site is listed in a directory.
o
Set your camera presets before you start your call so that you can
quickly use them during the call. (You can set up to 100 near-site
presets. Depending on the system you call, you may also be able to use
the presets stored on the far-site system.)
quickly use them during the call. (You can set up to 100 near-site
presets. Depending on the system you call, you may also be able to use
the presets stored on the far-site system.)
o
Add peripherals to your system to expand its use. For example, you
can add a VCR if you want to show a videotape, or add a Visual Concert
VSX or ImageShare II if you want to share data from a laptop or PC.
Connect and test your peripheral before any meeting.
can add a VCR if you want to show a videotape, or add a Visual Concert
VSX or ImageShare II if you want to share data from a laptop or PC.
Connect and test your peripheral before any meeting.
Tips for Great Video
o
Avoid wearing bright colors, all-light or all-dark clothing, or very
“busy” patterns (such as small checks or narrow stripes). Light
pastels and muted colors look the best on the screen.
“busy” patterns (such as small checks or narrow stripes). Light
pastels and muted colors look the best on the screen.
o
If there are windows in the room, close any drapes or blinds. Daylight is
a variable light source and can conflict with interior room lighting.
a variable light source and can conflict with interior room lighting.
o
Use natural gestures when you speak.
o
When adjusting your camera, try to fill the screen as much as
possible with people rather than with the table, chairs, walls, lights, or
the floor.
possible with people rather than with the table, chairs, walls, lights, or
the floor.