NorthStar Navigation Explorer 710 VHF 사용자 설명서

21

Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

The following options are available: 

Enter your user MMSID. See section 4.2. (If you do not have a user MMSID, see 
Appendix D.)

Enter or change the name and/or details of a group. 

Choose an automatic or manual response to calls (VHF 710US only). See section 
4.4.

Enter or change your ATIS MMSID (VHF 710EU only). 

Enable/disable the ATIS function (VHF 710EU only). 

Turn the DSC operation ON/OFF (on/off  ). 

Select the type of response to an LL polling request. 

Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change data. 

This is a once-only operation. You must enter your user MMSID before you can access the DSC functions.  

You can display and read your user MMSID at any time, but you get only one opportunity to enter your user 
MMSID.

1.  Select DSC SETUP, then USER MMSID. 

2.  If this is the fi rst time that you are entering your user MMSID, a dashed line appears. 

 

Enter your user MMSID along the dashed line. Press ENT to confi rm each correct entry and to move to 
the next digit. 

 

If you make an error, press - until < appears, then press ENT to backup and correct the entry.

3.  Press ENT to store your user MMSID.  

4. 

Enter your user MMSID again as a password check, then press ENT to permanently store the user MMSID 
and return to the menu.

 

You can view your stored user MMSID at anytime by selecting USER MMSID in the main menu.

These DSC facilities are available only on the 710US and 710EU and a valid user MMSID must be 
entered to access the DSC functions.

USER MMSID

GROUP SETUP

 

INDIV REPLY

ATIS MMSID

ATIS FUNC

DSC FUNC

LL REPLY

DSC SETUP

 > USER MMSID

   GROUP SETUP

   INDIV REPLY

INPUT USER 
MMSID

–––––––––

USER MMSID

INPUT AGAIN

–––––––––

187654321

MMSID

 > STORE

   CANCEL