Netopia R310 사용자 설명서

Your ISDN ser vice provider may have the Netopia Router on a list of suppor ted products that have been tested 
with a par ticular ISDN line configuration. Your ISDN ser vice provider will know how to set up your line if the 
Netopia Router is on that list.

To configure the Netopia Router, your ISDN ser vice provider must provide you with the switch protocol type used 
on your ISDN line. 

The Netopia Router suppor ts the following protocols:

■

EuroISDN (also known as ETSI or NET3)

■

Japanese NTT

■

Australian TS013

Once the Netopia Router is installed and configured, use the loopback test to evaluate the line. See 

. If the line does not work properly, ask your ISDN ser vice provider to 

reconfigure the line until it works properly. A successful loopback is necessar y for a bonded 128K 2B 
connection.

The following ISDN worksheets are provided for you to enter ISDN account information. For your convenience, 
you may want to photocopy the appropriate ISDN worksheet, and then complete the copy.

When completing the worksheet, fill in:

■

Section 1 when you find out from whom you’ll be ordering your ISDN line.

■

Section 2 when ordering your ISDN line. 

■

Section 3 after ordering your ISDN line.

Complete the worksheet carefully. You will need this information when configuring the Netopia Router.

Have the worksheet available if you call Netopia Technical Suppor t. The information on the sheet will help a 
Netopia technician answer your questions quickly.

Note: The ISDN worksheet is for your convenience only. You may receive forms containing similar information 
from your ISDN ser vice provider. The ISDN worksheet is neither an application for an ISDN line nor a substitute 
for the forms your ISDN ser vice provider uses.